HOT MESS MAMA Embroidery Sew on Patch. Love this Patch!!!. Patches for Mom, Grandmother or Friends as Gifts. Black People Patch. **7.50**

For all of US spirited Mothers and Grandmothers here is the Ultimate Sew on Embroidery Patch
"HOT MESS MAMA" !!!!!..THIS IS A FUN PATCH
Nice Patch for Jeans, Back Pack. Denim Jacket...Let Your Imagination Flow!!!
Approx. size is 3 1/4" X 3 1/2" Great Size.

Bright and Beautiful Bold Colors

MY SUGGESTED METHOD USING IRON OR HEAT PRESS:
For stronger durability, SEW around the edges after pressing.

Instructions:

Preheat Your Iron
Set your iron to "Cotton" or "High Heat" (around 300°F / 150°C).
Make sure the steam function is turned off.
Position the Patch

Lay the fabric on a flat, heat-resistant surface.
Place the patch in your desired location with the adhesive side down (backing against the fabric).
Protect the Patch

Cover the patch with a thin towel or parchment paper to prevent direct contact with the iron.
Apply Heat & Pressure

Press the iron firmly onto the patch for 30–45 seconds without moving it around.
Apply steady pressure to ensure the adhesive melts into the fabric.
Flip & Repeat

Turn the fabric inside out (if possible).
Iron the back of the patch for another 30 seconds to reinforce the bond.
Cool & Check

Let the patch cool for 5 minutes before touching it.
Gently tug the edges to check if it’s secure.
If edges lift, repeat the ironing process for another 10–15 seconds.
Extra Tips:
For extra durability, sew around the patch after ironing.
Avoid washing the item for 24 hours to let the adhesive fully set.
Wash on a gentle cycle and air dry to prolong patch life.
Your embroidered patch is now securely attached and ready to display!

Iron-On Instructions for an Embroidered Patch Using a HEAT PRES

Heat Press Settings:
Temperature: 305°F – 320°F (150°C – 160°C)
Pressure: Medium to firm
Time: 15–20 seconds

Instructions:

Preheat the Heat Press
Set your heat press to 305°F – 320°F (adjust based on fabric type).
Position the Patch

Lay your fabric flat on the heat press platen.
Place the patch on the fabric with the adhesive side down.
Cover the Patch

Place a Teflon sheet or parchment paper over the patch to protect the embroidery from direct heat.

Apply Heat & Pressure:
Press and apply firm pressure for 15–20 seconds.

Cool & Check:
Carefully remove the fabric from the heat press and let it cool for 5 minutes.
Check if the patch is securely adhered.
If edges lift, repeat the press for 5–10 more seconds.

MY SUGGESTED METHOD USING IRON OR HEAT PRESS:
For stronger durability, SEW around the edges after pressing.

Wait 24 hours before washing to allow the adhesive to set properly.

Please Contact us with any Questions.